Wall Systems

Flooring Systems Urethane | Flooring Systems Epoxy | Performance Coatings Urethane
Performance Coatings Epoxy | Wall Systems | Flooring Systems Decorative | Linings & Containment
Concrete Restoration | Membranes | Sealers | Engineered Grouts | Caulk & Joint Sealants | Patching | Primers
Specialty Products | Contractor Tools

ICO Glaze

Designed to be used in damp, high CIP and corrosive environments requiring seamless, non-porous surfaces that resist high temperature wash-downs and impact.

button-productdata

ICO Glaze ES

For smoothing and finishing CMU to remove grout lines, consisting of ICO Gel and two coats of ICO Glaze Top Coat. Minimum DFT : 30-40 mils.

ICO Glaze CC

For sealing concrete walls, consisting of ICO Gel(for filling bugholes) and two coats of ICO Glaze Top Coat. Minimum DFT: 20 mils.

ICO Glaze FG

A fiberglass reinforced wall coating system for enhanced crack resistance. System includes a scratch coat of ICO Gel, followed by a layup of 1 – 1 12 ounce fiberglass scrim cloth, then after drying, two coats of ICO Glaze Top Coat at 10 mils per coat.

ICO Glaze UV

Any of the above systems with a top coat of 4-5 mils of Ure Guard 100 UV-resistant aliphatic urethane top coat.

ICO Glaze AB

Any of the above systems with anti-bacterial additives in the top coat.

ICO Glaze Top Coat

ICO-Glaze® is our two part, 100% solids, zero VOC epoxy wall and ceiling coating designed for withstanding some of the toughest conditions in industrial, institutional and commercial establishments. The basic ICO Glaze system, designed to seal block walls and other porous CMU surfaces without use of any block fillers, is applied by brush, roller or spray at 20-30 mils total dry film thickness, consisting of one coat each of ICO Primer XT, ICO Glaze Base Coat and ICO Glaze Top Coat.

button-productdata

ICO Glaze Base Coat FC

ICO-Glaze® is our two part, 100% solids, zero VOC epoxy wall and ceiling coating designed for withstanding some of the toughest conditions in industrial, institutional and commercial establishments. The basic ICO Glaze system, designed to seal block walls and other porous CMU surfaces without use of any block fillers, is applied by brush, roller or spray at 20-30 mils total dry film thickness, consisting of one coat each of ICO Primer XT, ICO Glaze Base Coat and ICO Glaze Top Coat.

button-productdata

Fibercoat

Fibercoat is a two-component, ceramic fiber reinforced, high build coating system.  It is designed for walls, ceilings, columns, and other surfaces subject to chemical exposure.  Fibercoat is a high film build system with excellent adhesion to concrete or steel.

button-productdata