Flooring Systems-Epoxy

Flooring Systems Urethane | Flooring Systems Epoxy | Performance Coatings Urethane
Performance Coatings Epoxy | Wall Systems | Flooring Systems Decorative | Linings & Containment
Concrete Restoration | Membranes | Sealers | Engineered Grouts | Caulk & Joint Sealants | Patching | Primers
Specialty Products | Contractor Tools

 

3000 VS Coving

3000 VS is a trowel applied, monolithic, epoxy cove system, typically applied at 1/8″.  3000 VS coving system is used to protect vertical surfaces subject to chemical contact.  3000 VS is U.S.D.A. acceptable for use in food processing plants.

button-productdata

3300 CR

3300 CR is a three-component, trowel applied, ¼ inch, Novolac Epoxy flooring system. 3300 CR is U.S.D.A. acceptable for use in food processing facilities. It has excellent chemical resistance for severe environments such as secondary containment in chemical processing facilities, pulp & paper mills, and power plants.

button-productdata

3300 Fast Cure

3300 Fast Cure Patch Kit is a three component flooring system trowel applied as a slurry to a minimum 1/4 inch thickness.

button-productdata

3300 AR

3300 AR is a three-component, silicon carbide based mortar flooring system, trowel applied at a minimum ¼ inch. 3300 AR is U.S.D.A. acceptable for use in food processing plants and has excellent resistance to most acids, caustics, detergents and other corrosive materials. 3300 AR is specially formulated to withstand heavy abrasion in high traffic areas.

button-productdata

3300 FS

3300 FS is a three-component flooring system, trowel applied at a minimum ¼ inch. 3300 FS is designed to overlay entire floor surfaces, or repair smaller areas.

button-productdata

3300 GS

3300 GS is a three-component flooring system, trowel applied at a minimum ¼ inch. 3300 GS is designed to overlay entire floor surfaces, or repair smaller areas.

button-productdata

3300 PT

3300 PT is a three-component flooring system, trowel applied at a minimum ¼ inch. 3300 PT is excellent for patching or overlaying entire floor surfaces.

button-productdata

3800 FS

3800 FS is a four-component, screed rake applied, epoxy slurry system installed at ¼ inch (250 mils). 3800 FS is U.S.D.A. acceptable for food processing plants, and has excellent resistance to many acids, caustics, detergents, and other corrosive materials.

button-productdata

3800 CR

3800 CR is a four-component Novolac Epoxy, screed rake applied, slurry system installed at ¼ inch (250 mils). 3800 CR is U.S.D.A. acceptable for food processing plants, and has excellent resistance to most acids, caustics, detergents, and other corrosive materials.

button-productdata

6000 FS

6000 FS is a multi-layered laminate flooring system built up to approximately ¼ inch (250 mils) thick.  The monolithic surface is resistant to chemicals, thermal shock and abrasion.  6000FS is U.S.D.A. acceptable for use in food plants.

button-productdata

6100 FS

6100 FS is a multi-layered laminate flooring system built up to approximately ¼ inch (250 mils) thick.  The monolithic surface is resistant to chemicals, thermal shock and abrasion.  6100 FS is U.S.D.A. acceptable for use in food plants.

button-productdata

6200 FS

6100 FS is a multi-layered laminate flooring system built up to approximately ¼ inch (250 mils) thick.  The monolithic surface is resistant to chemicals, thermal shock and abrasion.  6100 FS is U.S.D.A. acceptable for use in food plants.

button-productdata

Fibercoat

Fibercoat is a two-component, ceramic fiber reinforced, high build coating system.  It is designed for walls, ceilings, columns, and other surfaces subject to chemical exposure.  Fibercoat is a high film build system with excellent adhesion to concrete or steel.
button-productdata

ICO Super Guard 

ICO Super Guard™ is a three part, low odor, 100% solids resin rich epoxy novolac system. As such it is one of our highest chemically resistant system for most concentrated acids, caustics and solvents.

button-productdata

ICO Hi Guard

ICO-Hi Guard ™ is a three part, 100% solids resin rich novolac epoxy coating providing excellent chemical resistance to most concentrated acids and caustics and some solvents.

button-productdata

ICO Guard 51

ICO Guard 51 is a three-part, flexibilized, resin rich epoxy flooring material, normally applied over concrete, with excellent chemical and thermal shock resistance. It is a USDA approved product with low odor, zero VOC’s, and excellent damp adhesion.

button-productdata

ICO Guard Cold Cure

ICO Guard Cold Cure™ is a three part, odorless epoxy flooring that can be trowel-applied in a single step application in any thickness down to 3/16” at temperatures as low as 32°F.

button-productdata

ICO Floor 51

ICO Floor 51 is a low odor, 100% solids trowelled epoxy flooring system. It is our most economical “resin-rich” system with a 5:1 ratio by weight or 3.3:1 by volume of aggregate to liquid.

button-productdata

ICO Floor Cove

ICO Floor is a three-part, 100% solids low odor epoxy flooring material offering excellent wear resistance in heavy traffic areas.  By virtue of its higher aggregate to liquid fill ratio, it can easily be power trowelled in any thickness down to 3/16”, leaving a flat matte finish.

button-productdata

ICO Floor FC 51

ICO Floor 51 is a low odor, 100% solids trowelled epoxy flooring system.  It is our most economical “resin-rich” system with a 5:1 ratio by weight or 3.3:1 by volume of aggregate to liquid.

button-productdata

ICO Floor FC Slurry

ICO Floor 51 is a low odor, 100% solids trowelled epoxy flooring system.  It is our most economical “resin-rich” system with a 5:1 ratio by weight or 3.3:1 by volume of aggregate to liquid.

button-productdata

ICO Floor SL

ICO-Floor SL is a three part, 100% solids, low odor epoxy flooring resurfacer.  Normally applied between 1/16” and 1/8” thick in a single step self leveling application, ICO-Floor SL quickly and economically restores a pitted, worn concrete floor to a smooth, glossy, easy-to-clean surface.

button-productdata

ICO Floor SL FC

ICO-Floor SL is a three part, 100% solids, low odor epoxy flooring resurfacer.  Normally applied between 1/16” and 1/8” thick in a single step self leveling application, ICO-Floor SL quickly and economically restores a pitted, worn concrete floor to a smooth, glossy, easy-to-clean surface.

button-productdata

ICO Guard Cove

ICO-Guard Coating™ is a two part, 100% solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments.  It is a USDA approved material, with zero VOC’s, no odor, and excellent color stability.

button-productdata

ICO Guard Cove FC

ICO-Guard Coating™ is a two part, 100% solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments.  It is a USDA approved material, with zero VOC’s, no odor, and excellent color stability.

button-productdata

ICO Guard FC 51

ICO-Guard 51™ is a three-part, flexibilized epoxy flooring material, normally applied over concrete, with excellent chemical and thermal shock resistance.  It is a USDA approved product with low odor, zero VOC’s, and excellent damp adhesion.

button-productdata

ICO Guard FC Slurry

ICO-Guard Coating™ is a two part, 100% solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments.  It is a USDA approved material, with zero VOC’s, no odor, and excellent color stability.

button-productdata

ICO Guard SL FC

ICO Guard SL™ is a three part, 100% solids, USDA-approved epoxy flooring resurfacer.  Normally applied between 1/16” and 1/8” thick in a single step self leveling application, ICO-Guard SL™ quickly  and economically restores pitted and damaged concrete floors to a smooth and glossy finish.

button-productdata

ICO Hi Guard Cove

ICO-Hi Guard Coating™ is a two part, 100% solids novolac epoxy coating providing excellent chemical resistance to most concentrated acids and caustics and some solvents.  Its unusually high resilience and toughness enables Hi Guard Coating™ to better withstand thermal shock and mechanical impact compared to more brittle conventional epoxy coatings.

button-productdata

ICO Hi Guard SL

ICO-Hi Guard Coating™ is a two part, 100% solids novolac epoxy coating providing excellent chemical resistance to most concentrated acids and caustics and some solvents.  Its unusually high resilience and toughness enables Hi Guard Coating™ to better withstand thermal shock and mechanical impact compared to more brittle conventional epoxy coatings.

button-productdata

ICO Hi Iron Guard

Iron Guard is a three part, iron reinforced troweled epoxy floor that combines the high chemical resistance and flexibility of our “ICO GUARD” resin system with the superior wear resistance of metal fillers.

button-productdata

ICO High Guard SL

ICO-Hi Guard SL™ is a three part, solvent-free,  100% solids, novolac epoxy flooring resurfacer.  Normally applied between 1/16” and 1/8” thick in a single step application, Hi Guard SL™ quickly and economically restores pitted and damaged concrete floors to a smooth and glossy finish.

button-productdata

ICO Iron Guard

Iron Guard is a three part, iron reinforced troweled epoxy floor that combines the high chemical resistance and flexibility of our “ICO GUARD” resin system with the superior wear resistance of metal fillers.

button-productdata

ICO Iron Guard GS

Iron Guard is a three part, iron reinforced troweled epoxy floor for general service, severe wear and/or impact use.  It can be applied in a single pass in any thickness down to ” in a single pass in a temperature range of 50 – 90°F without need for a primer or top coat.

button-productdata

ICO Super Guard Cove

ICO Super Guard Coating™ is a two part, low odor,  100% solids epoxy novolac coating.  As such it is our highest chemically resistant  coating for most concentrated acids, caustics and solvents.

button-productdata

ICO Super Guard SL

ICO Super Guard Coating™ is a two part, low odor,  100% solids epoxy novolac coating.  As such it is our highest chemically resistant  coating for most concentrated acids, caustics and solvents.

button-productdata

ICO Super Iron Guard

Iron Guard is a three part, iron reinforced troweled epoxy floor for general service, severe wear and/or impact use.  It can be applied in a single pass in any thickness down to ” in a single pass in a temperature range of 50 – 90°F without need for a primer or top coat.

button-productdata

ICO Guard SL

ICO Super Guard Coating™ is a two part, low odor,  100% solids epoxy novolac coating.  As such it is our highest chemically resistant  coating for most concentrated acids, caustics and solvents.

button-productdata