2600 LS is a monolithic epoxy liner, formulated for chemical and abrasion resistance in corrosive atmospheres, or continuous immersion service. Trowel applied at 1/8 inch, 2600 LS can be applied to horizontal, vertical, and overhead surfaces without sagging.
ADVANTAGES:
- Monolithic – Seamless Surface
- Excellent Chemical Resistance
- Applicator Friendly – Easy To Apply
- Excellent Adhesion
- Short Downtime – Quick Cure
- Minimal Maintenance – Durable
- S.D.A. Acceptable
USES:
- Chemical Tanks, Pits, Sumps
- Paper Stock Vessels
- Hot Water Storage Tanks
- Pump Casings
- Slurry Tanks
- Waste Neutralization Pits
- Trenches
PACKAGING:
2600 LS – Liner System – packaged in batches consisting of the following –
2600 LS – Primer – covers approximately 30 square feet at 10 mils, and consists of the following –
- 1 container – Part A (resin)
- 1 container – Part B (hardener)
