ICO Glaze Base Coat FC

ICO-Glaze® is our two part, 100% solids, zero VOC epoxy wall and ceiling coating designed for withstanding some of the toughest conditions in industrial, institutional and commercial establishments. The basic ICO Glaze system, designed to seal block walls and other porous CMU surfaces without use of any block fillers, is applied by brush, roller or spray at 20-30 mils total dry film thickness, consisting of one coat each of ICO Primer XT, ICO Glaze Base Coat and ICO Glaze Top Coat. It has excellent dry as well as damp adhesion to most well prepared substrates. It dries to a high gloss, easily cleanable finish and is resistant to mold and moisture penetration. Its flexibilized formulation (with a 9% tensile elongation) enables it to withstand thermal shock better than conventional, more brittle epoxies.

ICO-Glaze® is particularly designed for use in damp, corrosive environments requiring seamless, non-porous surfaces that resist hot wash-downs, harsh chemical cleaners and moderate impact. Typical uses include meat and dairy plants, beer and beverage facilities, cleanrooms, kitchens, shower enclosures, car washes, hospital operating rooms and pharmaceutical plants.

By virtue of its odorless components, our ICO Glaze systems are well suited for repair and maintenance work even while the facility is in operation, as well as for new construction. Note that it is important to remove old coatings prior to application, as well as properly prepare the underlying substrate.