5500 Grout

5500 Grout is a trowel-applied polyester at a minimum of 1/2″ thickness.  It is used to fill eroded areas, or create slope, prior to application of a 5000 and 6000 Series Systems.  5500 Grout can be installed up to 2″ thick (multiple coats can be applied if a thicker mortar is required) and requires a short cure time before finish system application.


  • Excellent Adhesion
  • Compatible With All Milamar 5000 and 6000 Series Finish Systems
  • Significantly Stronger Than Concrete Fill
  • Short Cure Time – Quick Cure
  • Prepackaged Easy To Use
  • Applicator Friendly – Trowel Applied System


  • Fill Damaged Areas
  • Curbs and Pads
  • Patch Machinery Footprints
  • Slope to Drains



Case Studies:

Bleach Plant

Recovery Boiler