Performance Coatings Epoxy

Flooring Systems Urethane | Flooring Systems Epoxy | Performance Coatings Urethane
Performance Coatings Epoxy | Wall Systems | Flooring Systems Decorative | Linings & Containment
Concrete Restoration | Membranes | Sealers | Engineered Grouts | Caulk & Joint Sealants | Patching | Primers
Specialty Products | Contractor Tools

 

ICO Super Guard Coating

Suitable as a secondary containment barrier inside or outside, for concrete and other porous substrates.

button-productdata

ICO Hi Guard Coating

Recommended for areas both inside and outside requiring excellent protection from strong acids and caustics.

button-productdata

ICO Guard Coating

Primarily used for protecting concrete surfaces in corrosive environments.

button-productdata

ICO Floor Coating

Ideal floor coating for providing an excellent light-reflective surface that will prevent moisture and other liquids from penetrating through to the concrete.

button-productdata

ICO Rust Guard

Ideally suited for coating structural steel and other metal surfaces, especially in food & beverage establishments where minimization of odor is critical.

button-productdata

ICO Sealer Fast Cure

ICO-Sealer FC™ is a two part, solvent-free clear epoxy sealer. It has no odor during application and no toxic byproducts. It is normally applied anywhere up to 20 mils (80 sf/gal) as a single coat.

button-productdata

ICO Guard Coating FC

ICO-Guard Coating™ is a two part, 100% solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments.

button-productdata

ICO Guard Coating XFC

ICO-Guard Coating™ is a two part, 100% solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments.

button-productdata

ICO Guard Coating AB

ICO-Guard Coating™ is a two part, 100% solids, epoxy coating primarily for protecting concrete surfaces in corrosive environments.

button-productdata

ICO Floor Coating Clear

ICO Floor Coating Clear ™ is a two part, 100% solids epoxy coating with very low odor and excellent self-leveling characteristics.

button-productdata

ICO Floor Coating SY

ICO Floor Coating SY™ is a two part, 100% solids epoxy coating designed for use as a safety striping material.

button-productdata

ICO Guard Coating GF

ICO Guard Coating GF is a 100% solids, two-part epoxy coating reinforced with glass flakes for enhanced permeability resistance.

button-productdata

PM100

Designed to be extremely versatile, can be used in troweled epoxy, mortars, self-leveling, and broadcast flooring systems. Good chemical resistance, excellent abrasion and impact resistance. Excellent color stability.

button-productdata

PM200

This is not a floor paint. It is used primarily in industrial and commercial applications to obtain slip resistance.

button-productdata

PM300

Heavy duty epoxy coating designed to be used where extra chemical, impact, and abrasion resistance is required.

button-productdata

PM400

Meets performance standards, including chemical, abrasion, and impact resistance of traditional heavy-duty industrial epoxy floor coatings.

button-productdata

PM 4000 EF

Milamar PM4000EF Floor Coating System is comprised of a waterborne epoxy primer/base coat with exceptional adhesion to concrete and a unique low odor, low VOC, chemical resistant urethane finish.

button-productdata

PM 5000 AC

Milamar PM5000AC Aircraft Hangar Floor Coating System is comprised of a Unique Penetrating Polymer Primer, an Epoxy Binder Coat and a Special UV/Chemical Resistant Urethane Finish.

button-productdata

1000 AM

Has an antimicrobial additive that protects the flooring system by inhibiting the growth of odor causing bacteria, fungi, mold, mildew and algae.

button-productdata

1000 CS

A semi self-leveling epoxy that is USDA acceptable for food processing plants, and has excellent resistance to most dilute acids, caustics, and detergents.

button-productdata

1550 HT

Chemical resistant coating system designed as a tank lining and coating for walls, ceilings, columns, and is USDA acceptable for food processing plants.

button-productdata

2600 LS Veilcoat

2600 LS is a monolithic epoxy liner, formulated for chemical and abrasion resistance in corrosive atmospheres, or continuous immersion service.

button-productdata

3300 CR Veil Coat

Chemical resistant novolac epoxy top coat designed for aggressive chemical exposures in pulp & paper mills, chemical process facilities, and power plants.

button-productdata

6650 CS

Chemical resistant vinyl ester coating system designed for walls, ceilings, columns and other surfaces subjected to immersion, spills, or fumes.

button-productdata

6750 CS

Chemical resistant chlorendic polyester coating system designed for walls, ceilings, columns and other surfaces subjected to immersion, spills, or fumes.

button-productdata

6850 CS

Chemical resistant vinyl ester coating high performance build system with excellent adhesion to concrete or steel, designed for immersion, spills, or fumes.

button-productdata